€24.99 €29.99 Incl VAT
_
ProFab have teamed up with US company BuildTak, to provide a solution to two of the biggest problems with operating the printers-The lack of removable bed with these printers and the removal of your print from the bed. With our solution, you simply add the custom four bed clips between the bed and corner springs, slide your flex bed onto the heated bed and fasten it with the clips and then level as normal.
*
Easily Install in 5 mins
No need to modification the printer
*
With ProFab Mini’s FlexBed System there is no need any more to struggle removing your print for ages with a spatula, damaging both the model and the machine. The FlexBed is made from high grade spring steel so you can simply flex the bed a couple of times and you will hear a magical pop – this is your print detaching from the bed, as easy as that!
The Flex Bed System provides the invaluable convenience of removing the bed from the printer after printing. Simply slide the clips open and remove the bed, thus getting a better access and more freedom to remove your print.Then put the bed back onto the printer, slide the clips and you are done – no more digging at the printer with a spatula!
By adding custom clips ProFab 3D have ensured that your FlexBed is well secured to the heated bed, while at the same time providing very quick and easy way for the bed to be removed and placed back.
ProFab 3D have specifically designed both the flex bed and the BuildTak printing surface sheet so that their custom shape provides unobstructed access to the bed levelling screws, therefore allowing you can level the bed after placing the bed.
The Flex Bed system was specifically designed so that it requires no modifications or changes to the printer. Simply add the custom four bed clips between the bed and corner springs, slide your flex bed onto the heated bed, fasten it with the clips and then level as normal.
The Flex Bed System includes a sheet of BuildTak specifically designed for the ProFab Mini, Monoprice Select Mini and Malyan 200. It guarantees perfect adhesion and could be used for numerous prints without the hassle and difficulty of applying glass tape or other solutions.
With ProFab Mini’s FlexBed System there is no need any more to struggle removing your print for ages with a spatula, damaging both the model and the machine. The FlexBed is made from high grade spring steel so you can simply flex the bed a couple of times and you will hear a magical pop – this is your print detaching from the bed, as easy as that!
The Flex Bed System provides the invaluable convenience of removing the bed from the printer after printing. Simply slide the clips open and remove the bed, thus getting a better access and more freedom to remove your print.Then put the bed back onto the printer, slide the clips and you are done – no more digging at the printer with a spatula!
By adding custom clips ProFab 3D have ensured that your FlexBed is well secured to the heated bed, while at the same time providing very quick and easy way for the bed to be removed and placed back.
ProFab 3D have specifically designed both the flex bed and the BuildTak printing surface sheet so that their custom shape provides unobstructed access to the bed levelling screws, therefore allowing you can level the bed after placing the bed.
The Flex Bed system was specifically designed so that it requires no modifications or changes to the printer. Simply add the custom four bed clips between the bed and corner springs, slide your flex bed onto the heated bed, fasten it with the clips and then level as normal.
The Flex Bed System includes a sheet of BuildTak specifically designed for the ProFab Mini, Monoprice Select Mini and Malyan 200. It guarantees perfect adhesion and could be used for numerous prints without the hassle and difficulty of applying glass tape or other solutions.
You must be logged in to post a review.
Reviews
There are no reviews yet.